Modchip 板


LINE

http://nwert.wordpress.com/2012/07/11/eeid-cryptography/ When metldr is encrypted at factory, a special keyset is set in the binary before encryption. Later when an isolated loader is loaded by metldr, it will copy the keyset to LS offset 0x00000. It consists of eid_root_key and eid_root_iv. To not having to use the same key for all eEID parts, several subkeys are generated from special data called individual information seed. These seeds are stored in the metadata header of isolated modules loaded by isoldr. When isoldr will load a module, it will call a subroutine that encrypts each seed chunk (0x40 bytes) using eid_root_key and eid_root_iv. Then the so-called individual infos are passed in registers r7 to r22 (= 0x100 bytes in total) to the loaded module where they are used further. Usually isolated modules have a seed section of 0x100 bytes but all of them (except sb_iso_spu_module) have all zeroes but the first 0x40 bytes chunk. You can, for example, find the recently published EID0 seed in the metadata section of aim_spu_module. Appliance info manager is used to get e.g. the target ID or the PSID from EID0. This explains why the seed can also be found in isoldr directly, since that one is checking EID0 too. As you can probably think, a fair amount of reversing time and knowledge has gone into finding this, so stop calling us *swearwords* for not releasing information that could potentially lead to more piracy, because we think that this would do more harm to the “scene” than just keeping some information in private (for now). Also I can only encourage everyone that thinks about us this way or is greedy demanding for developers/reverse engineers to release their stuff, to fire up isoldr in IDA or disassemble it with objdump and try to reverse all this from start to end. We’ll see, who is able to pull this through on his own... -- ____ _ _ _ _ ____ _ _ ____ _____ ____ (_ _)( \( )( \/ )( ___)( \( )(_ _)( _ )( _ \ _)(_ ) ( \ / )__) ) ( )( )(_)( ) / (____)(_)\_) \/ (____)(_)\_) (__) (_____)(_)\_) --



※ 發信站: 批踢踢實業坊(ptt.cc)
◆ From: 122.117.54.160







like.gif 您可能會有興趣的文章
icon.png[問題/行為] 貓晚上進房間會不會有憋尿問題
icon.pngRe: [閒聊] 選了錯誤的女孩成為魔法少女 XDDDDDDDDDD
icon.png[正妹] 瑞典 一張
icon.png[心得] EMS高領長版毛衣.墨小樓MC1002
icon.png[分享] 丹龍隔熱紙GE55+33+22
icon.png[問題] 清洗洗衣機
icon.png[尋物] 窗台下的空間
icon.png[閒聊] 双極の女神1 木魔爵
icon.png[售車] 新竹 1997 march 1297cc 白色 四門
icon.png[討論] 能從照片感受到攝影者心情嗎
icon.png[狂賀] 賀賀賀賀 賀!島村卯月!總選舉NO.1
icon.png[難過] 羨慕白皮膚的女生
icon.png閱讀文章
icon.png[黑特]
icon.png[問題] SBK S1安裝於安全帽位置
icon.png[分享] 舊woo100絕版開箱!!
icon.pngRe: [無言] 關於小包衛生紙
icon.png[開箱] E5-2683V3 RX480Strix 快睿C1 簡單測試
icon.png[心得] 蒼の海賊龍 地獄 執行者16PT
icon.png[售車] 1999年Virage iO 1.8EXi
icon.png[心得] 挑戰33 LV10 獅子座pt solo
icon.png[閒聊] 手把手教你不被桶之新手主購教學
icon.png[分享] Civic Type R 量產版官方照無預警流出
icon.png[售車] Golf 4 2.0 銀色 自排
icon.png[出售] Graco提籃汽座(有底座)2000元誠可議
icon.png[問題] 請問補牙材質掉了還能再補嗎?(台中半年內
icon.png[問題] 44th 單曲 生寫竟然都給重複的啊啊!
icon.png[心得] 華南紅卡/icash 核卡
icon.png[問題] 拔牙矯正這樣正常嗎
icon.png[贈送] 老莫高業 初業 102年版
icon.png[情報] 三大行動支付 本季掀戰火
icon.png[寶寶] 博客來Amos水蠟筆5/1特價五折
icon.pngRe: [心得] 新鮮人一些面試分享
icon.png[心得] 蒼の海賊龍 地獄 麒麟25PT
icon.pngRe: [閒聊] (君の名は。雷慎入) 君名二創漫畫翻譯
icon.pngRe: [閒聊] OGN中場影片:失蹤人口局 (英文字幕)
icon.png[問題] 台灣大哥大4G訊號差
icon.png[出售] [全國]全新千尋侘草LED燈, 水草

請輸入看板名稱,例如:BabyMother站內搜尋

TOP