我已经成功用NFS挂上4个版本的FILESYSTEM了, 分别是friendly arm 的1.5 2.1的以及openmoko 的 freerunner 但分别出现了以下讯息後就停住了，板子上的画面则下去都是一行"Android"文字 希望大大可以开示一下感激不尽那里出了问题该怎麽走下去 感觉应该快成功了 感激不尽 我人在日本,如果有大大愿意线上教学让移植顺利成功的话 我愿意出学费的(我不是做嵌入式相关行业的,所以没有认识的人可问XD) 我的板子是飞凌的FL2440 BOOTLOADER是U-boot kernel是用mini2440提供的android kernel 2.6.27下去改的 请多指教 1.openmoko ---------------------------------------------------------------------- 前略 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 IP-Config: Complete: device=eth0, addr=192.168.0.56, mask=255.255.255.0, gw=192.168.0.1, host=192.168.0.56, domain=, nis-domain=(none), bootserver=192.168.0.70, rootserver=192.168.0.70, rootpath= Looking up port of RPC 100003/2 on 192.168.0.70 Looking up port of RPC 100005/1 on 192.168.0.70 VFS: Mounted root (nfs filesystem). Freeing init memory: 112K init: cannot open '/initlogo.rle' init: cannot find '/system/bin/playmp3', disabling 'bootsound' sh: can't access tty; job control turned off # warning: `rild' uses 32-bit capabilities (legacy support in use) ------------------------------------------------------------------------- 2.friendly arm 的1.5 mini2440用 --------------------------------------------------------------------------- 前略 Looking up port of RPC 100005/1 on 192.168.0.70 VFS: Mounted root (nfs filesystem). Freeing init memory: 112K mknod: /myDev/ts0: File exists mknod: /myDev/fb0: File exists mknod: /myDev/ts_ctl: File exists open file errer! ts_open: No such device init: cannot open '/initlogo.rle' init: Unable to open persistent property directory /data/property errno: 2 sh: can't access tty; job control turned off / # init: cannot find '/system/bin/playmp3', disabling 'bootsound' warning: `rild' uses 32-bit capabilities (legacy support in use) nfs: server 192.168.0.70 not responding, still trying --------------------------------------------------------------------------- 这里我觉的很奇怪，明明nfs已经挂好了为何又说没反应 3.friendly arm 的2.1 mini2440用 --------------------------------------------------------------------------- 前略 Looking up port of RPC 100005/1 on 192.168.0.70 VFS: Mounted root (nfs filesystem). Freeing init memory: 112K mknod: /myDev/ts0: File exists mknod: /myDev/fb0: File exists mknod: /myDev/ts_ctl: File exists open file errer! ts_open: No such device Segmentation fault init: cannot open '/initlogo.rle' sh: can't access tty; job control turned off / # init: cannot find '/system/bin/playmp3', disabling 'bootsound' init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' warning: `rild' uses 32-bit capabilities (legacy support in use) g_file_storage: version magic '2.6.27 preempt mod_unload ARMv4 ' should be '2.6.27 mod_unload ARMv4 ' init: untracked pid 677 exited init: untracked pid 738 exited init: untracked pid 751 exited init: untracked pid 764 exited init: untracked pid 777 exited init: untracked pid 790 exited init: untracked pid 803 exited 数字一直增加跑下去 -------------------------------------------------------------------------- 4. --------------------------------------------------------------------------- 前略 <3>init: cannot find '/system/bin/playmp3', disabling 'bootsound' init: cannot find '/system/bin/playmp3', disabling 'bootsound' sh: can't access tty; job control turned off # <3>init: untracked pid 1726 exited init: untracked pid 1726 exited <3>init: untracked pid 1725 exited init: untracked pid 1725 exited <6>warning: `rild' uses 32-bit capabilities (legacy support in use) warning: `rild' uses 32-bit capabilities (legacy support in use) <3>init: untracked pid 1732 exited init: untracked pid 1732 exited <3>init: untracked pid 1733 exited init: untracked pid 1733 exited <3>init: untracked pid 1741 exited init: untracked pid 1741 exited <3>init: untracked pid 1742 exited init: untracked pid 1742 exited <3>init: untracked pid 1746 exited init: untracked pid 1746 exited <3>init: untracked pid 1747 exited init: untracked pid 1747 exited <3>init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode <0>Restarting system with command 'recovery'. Restarting system with command 'recovery'. arch_reset: attempting watchdog reset arch_reset: at ---------------------------------------------------------------------------- --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 60.56.229.18 ※ 编辑: hideofuyang 来自: 60.56.229.18 (12/05 12:24)