1.机种(请PO型号)：Lite-On iHBS312 2 PL16 (ATAPI) 2.片子/来源 (片子请PO出光碟相关资讯和描述空片外观，档案或是影片请尽可能说明清楚)： 1. Melody 50G: http://ppt.cc/Z01y 2. VERBATIM 50G: http://ppt.cc/eQaa 3.烧录/读取速度：Melody:6x, VERBATIM:4x 4.使用软体(注明版本)：ImgBurn 2.5.7.0 5.提供PC配备 MB(主机板型号厂牌):技嘉 H77-D3H POWER(厂牌瓦数):海韵 S12II 430W 作业系统(Linux, Windows, MacOS 版本):Windows 7 SP1 电脑年龄(刚组好的电脑 或是用一阵子变这样): 电脑组好约三个月, 之前都没试烧过BD 6.错误讯息或症状详述(可以的话请附上详细过程)： 本来一开始用Melody的片烧, 一开始完全都不能烧, 也完全都读不到片子, 後来将韧体升级之後才读得到, 可也不是每片都读得到, 有些可以有些不行, 然後读得到的也不一定可以烧, 有出现过"Timeout on Logical Unit"和 "Power Calibration Area Error"的错误讯息 可以烧的也有烧失败过一片, 成功的有三片, 可是即便烧成功後却不一定可以播放, 因为烧完後再重新把片子放进去又读不到了, 之所以知道有烧成功是因为把片子放到蓝光播放器是可以放的 有换过I/O, 也有换过排线, 都是类似的情形 然後今天再买了VERBATIM的来烧, 却始终都烧不成功, 错误讯息如下: (VERBATIM的在烧时也有换排线跟I/O, 出现的讯息都一样) http://ppt.cc/sJe3 error log: I 19:46:18 ImgBurn Version 2.5.7.0 started! I 19:46:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 19:46:18 Total Physical Memory: 8,280,304 KB - Available: 5,309,892 KB I 19:46:18 Initialising SPTI... I 19:46:18 Searching for SCSI / ATAPI devices... I 19:46:18 -> Drive 1 - Info: ATAPI iHBS312 2 PL16 (E:) (ATAPI) I 19:46:18 -> Drive 2 - Info: DVDFab Virtual Drive 1.1 (F:) (SCSI) I 19:46:18 -> Drive 3 - Info: DVDFab Virtual Drive 1.1 (G:) (SCSI) I 19:46:18 Found 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 19:47:43 Operation Started! I 19:47:43 Source File: J:\BD Movie\Tai.Chi.Hero.2012.BluRay.1080p.AVC.DTS-HDMA5.1.TrueHD5.1-CHDBits.iso I 19:47:43 Source File Sectors: 20,890,304 (MODE1/2048) I 19:47:43 Source File Size: 42,783,342,592 bytes I 19:47:43 Source File Volume Identifier: TAI CHI 2 I 19:47:43 Source File Volume Set Identifier: 0382F9E6 TAI CHI 2 I 19:47:43 Source File Application Identifier: RoviScenaristBD I 19:47:43 Source File Implementation Identifier: RoviScenaristBD571B38A I 19:47:43 Source File File System(s): UDF (2.50) I 19:47:43 Destination Device: [0:1:0] ATAPI iHBS312 2 PL16 (E:) (ATAPI) I 19:47:43 Destination Media Type: BD-R (Disc ID: VERBAT-IMd-000) I 19:47:43 Destination Media Supported Write Speeds: 4x I 19:47:43 Destination Media Sectors: 24,438,784 I 19:47:43 Write Mode: BD I 19:47:43 Write Type: DAO I 19:47:43 Write Speed: MAX I 19:47:43 Hardware Defect Management Active: No I 19:47:43 BD-R Verify Not Required: Yes I 19:47:43 Link Size: Auto I 19:47:43 Lock Volume: Yes I 19:47:43 Test Mode: No I 19:47:43 OPC: No I 19:47:43 BURN-Proof: Enabled I 19:47:45 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x) I 19:47:45 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 19:48:52 Filling Buffer... (80 MB) I 19:48:54 Writing LeadIn... W 19:56:04 Failed to Write Sectors 2816 - 2847 - Reason: Invalid Address For Write W 19:56:04 Retrying (1 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (2 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (3 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (4 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (5 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (6 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (7 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (8 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (9 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (10 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (11 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (12 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (13 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (14 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (15 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (16 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (17 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (18 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (19 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:04 Retrying (20 of 20)... W 19:56:04 Retry Failed - Reason: Invalid Address For Write W 19:56:53 Retrying (21)... W 19:56:53 Retry Failed - Reason: Invalid Address For Write W 19:56:57 Retrying (22)... W 19:56:57 Retry Failed - Reason: Invalid Address For Write E 19:57:31 Failed to Write Sectors 2816 - 2847 - Reason: Invalid Address For Write E 19:57:31 Next Writable Address: 0 I 19:57:31 Synchronising Cache... W 19:58:04 User opted to skip the 'Close Track/Session/Disc' functions. E 19:58:04 Failed to Write Image! E 19:58:04 Operation Failed! - Duration: 00:10:20 I 19:58:04 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) 7.发问前做了多少功课.请先说清楚 有更新韧体, 有换过I/O, 也有换过排线, 也用了两种不同的片子, 却始终烧得非常不顺, 所以想问各位专家这种情况是不是烧录机有问题, 如果是的话, Lite-On的送修要怎麽送修呢? 是不是只能请原购买店家送修? 请帮忙解惑, 谢谢!!! (参阅"[心得] 买来了烧录机之後的二三事") --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 1.163.81.236