作者loocaaa (God Bless Me!!)
看板Cad_Cae
标题[问题] 关於Hypermesh_Optistru 记忆体配置
时间Wed Nov 5 12:22:22 2008
#先说明一下电脑配备
AMD Phenom(tm) 9850 2.51GHZ
4核心
8G记忆体
系统为X64
#模型的 element 约有四十几万个，网格大小约十几公厘
做的分析为 Frequency Responce
结果他出线的错误讯息如下:
ERROR # 7007 FROM SUBROUTINE check_mem
The run failed because automatic memory expansion has failed.
Currently allocated working storage is 1011 MB.
Automatic expansion failed to expand to 2143 MB.
The failed amount is the minimum required memory to complete the run.
Please verify whether the system has enough memory. If it has, then please
try this run with the fixed memory allocation to avoid a probable limitation
on the maximum locatable memory with the automatic memory allocation.
***** NOT ENOUGH MEMORY ERROR *****
我记忆体明明就有8G，可是还是不能跑....
从他的错误讯息应该是记忆体配置问题
请问有高手能教我如何解决这问题吗 @@?
感谢各位的指教阿!!
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 140.112.27.107
1F：→ loocaaa:分析时之memory options 已将调至 7000MB 还是同样问题! 11/10 14:50