作者cklittlepig ()
看板Cad_Cae
标题Re: [问题] ANSYS 自重分析
时间Wed Aug 19 13:12:06 2009
在网路上找到了University of Alberta的ANSYS教学
http://www.mece.ualberta.ca/tutorials/ansys/IT/Density/Density.html
其中自重分析它利用的单位是
length (mm)
Young's modulus EX: 200000 (MPa)
Density DENS: 7.86e-6 (kg/mm^3) ?
---->因此质量应该是用 kg
关於加速度的说法
The following window will appear.
Fill it in as shown to define an acceleration of 9.81m/s2 in the y direction.
Note: Acceleration is defined in terms of meters (not 'mm' as used throughout
the problem). This is because the units of acceleration and mass must be
consistent to give the product of force units (Newtons in this case).
Also note that a positive acceleration in the y direction
stimulates gravity in the negative Y direction.
所以不管质量单位,加速度仍然为9.8 @@
※ 引述《cklittlepig ()》之铭言:
: 单位上如果使用了kg mm的系统
: 那加速度该使用9.8m/s^2
: 还是9.8e3 mm/s^2呢?
: 直觉上用下者
: 但是朋友说help里面说都用9.8即可@@
: 有人知道确切的设定方式吗?
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 61.62.111.22
※ 编辑: cklittlepig 来自: 61.62.111.22 (08/19 13:12)
1F:推 SCHLAGER:有限元素法本身没有单位 单位是自订的 08/19 20:43
2F:推 quaintness:原PO只想知道用mm, 加速度是不是设多少,对单位统一自定 08/20 02:04
3F:→ quaintness:看起来是搞不清楚..不管质量单位是对的,加速度还在9.8 08/20 02:04
4F:→ quaintness:○rz ... 08/20 02:04
5F:→ quaintness: 却 08/20 02:05
6F:→ quaintness:现在电脑跑那麽快,跑个范例只去试9.8及9.8e3,结果一不 08/20 02:07
7F:→ quaintness:一样,看得出来吧?! 08/20 02:07