作者threedices (三颗骰子)
看板Modchip
标题[Wii ] Wasabi
时间Sat Mar 1 05:53:16 2008
有新的晶片...Wasabi
http://www.wasabi.net.cn/
Features 特色
* Direct boot of Wii and Gamecube original, import, and backup discs
直读Wii/GC 原版,跨区,或备份片
*
Supports all chipset versions: DMS, D2A, D2B and D2C (including D1A)
支援DMS, D2A, D2B and D2C(包含D1A)
* Supports all regions, configurable via jumpers
可在各区主机上使用,用jumper设定
*
Fully upgradable from DVD (no external programmer required)
支援使用DVD升级 (不需另外晶片烧录器)
*
Only 5 wires on DMS, D2A, D2B
在DMS, D2A, D2B上使用五条线
*
Only 9 wires on D2C (only 3 of them soldered to pin/via)
在D2C上使用九条线 (只需其中三条接在晶片脚上)
* Very easy installation on "cut-pin" drives
断脚机也好安装
* On-board flash (128KB)
晶片上附128KB记忆体
* Integrated Audiostreaming fix for GC games
包含GC audio-fix
* Excellent media compatibility (supports DL media)
片子相容度高 (支援DL 双层片)
* Works with SMG and SSBB
可以跑银马和大乱斗
* Flash recovery mode
含复原模式 (把晶片刷回出厂状态?)
* Two LED for easy installation troubleshooting
两个LED指示灯
* Full firmware control even on D2C chipset
在D2C上也有韧体控制 (指有办法在D2C上更新晶片的韧体????)
* Drivecode symmetry between all chipset versions
程式码在各种主机上的对称性(相似?) (啥??)
* Compatible with all GC and Wii homebrew programs
支援GC和Wii的homebrew (Wii homebrew离正式完全破解还有一段咧)
* No extra wires required for region override
开启跨区不需另外加线
* No external switch required
不需加开关
Did you know that current ISO dumpers are currently missing a few KB of data
stored in the barcode (BCA) and lead-in area ? This "extra" data could be
read by the console and used to detect chips. SMG and SSBB are the first games
to call one of the related drive commands, without interpreting the data yet.
We take that as a warning. Thanks to on-board memory, the "extra" data of your
whole game collection could be stored on the chip itself if that becomes
necessary. The flash memory is also used to store the drivecode and could
store patches and Wii/GC binaries in the future.
这段基本上说,目前抓iso的软体都有漏抓了一些barcode (BCA)或lead-in area
(有人能解释吗?) 而他们有加记忆体的晶片代表假如有需要的话,可以放到晶片里
让wii要读这区域时从记忆里读,或是放些更新或补丁之类的
(而此得证其他晶片是俗辣,叫人买他们的)
--
※ 发信站: 批踢踢实业坊(ptt.cc)
◆ From: 129.128.214.143
※ 编辑: threedices 来自: 129.128.214.143 (03/01 05:54)
1F:推 a1277031:不知道呛不呛... 61.57.154.8 03/01 13:24
2F:推 ruemann:D1A是啥啊?9线跑D2C蛮威的…… 203.67.247.43 03/01 14:13
3F:推 myfancy:很像不错唷!~推推! 61.216.175.234 03/01 14:33
4F:→ threedices:D1A指晶片为 GC2-D1或GC2-D1A,但晶片跟 68.148.225.101 03/01 16:24
5F:→ threedices:D2C用的通 所以被当作D2C改 68.148.225.101 03/01 16:25
增加自己翻译
※ 编辑: threedices 来自: 68.148.225.101 (03/01 16:49)
6F:推 Modchip:这样看起来很好用啊... 203.73.6.231 03/01 17:55
7F:推 ChelseaFC:也就是说就算改完机可以读到备份片,但 61.69.40.77 03/03 21:20
8F:→ ChelseaFC:是因为dumper漏掉一些位於条码及导入区 61.69.40.77 03/03 21:20
9F:→ ChelseaFC:的位元组,当机器读不到这些讯息时,就 61.69.40.77 03/03 21:21
10F:→ ChelseaFC:判定片子读的到是因为装有改机晶片,是 61.69.40.77 03/03 21:21
11F:→ ChelseaFC:这个意思吗? 61.69.40.77 03/03 21:22