不管你是家里没有网路 或是有无法明说的原因无法使用 PS3 上网启动 ATRAC 和 WMA 的播放功能, 在这边提供一个可以离线启动的方法, 注意下面的修改方式会修改到 PS3 登录档, 有可能让你的 PS3 变成一块"漂亮的砖头" 1. 使用破解棒启动你的 PS3 2. 使用 FTP 下载位於 /dev_flash2/etc/ 下的 xRegistry.sys 档案到你的电脑 3. 开启 xRegistry.sys Editor (下载连结 http://stoker25.com) 4. 载入 xRegistry.sys ([File]=>[Open]),找到 /setting/music/atracActivation /setting/music/wmaActivation 把 Vaule 由 00000000 改成 00000001 并按下 [Save] 然後选 [File]=>[Close] 5. 把修改好的 xRegistry.sys 复制到随身碟,然後接到 PS3 上 6. 用 ComgenieAwesomeFilemanager 把随身碟上的 xRegistry.sys 覆盖下面两个档案 /_dev_flash2/etc/xRegistry.sys /_dev_flash2/etc/backup/xRegistry.sys 注意要先按 [select] 启动高级模式才能覆盖 ======================== 原文连结 : http://www.ps3hax.net/showthread.php?p=122026 If you are using Jailbreak, then you have to completely block PSN (by using non-working PS3 DNS network settings and/or blocking the MAC with a router) to prevent your PS3 from sending logs to Sony. That means you unfortunately can't enable ATRAC and WMA playback online. Not to worry, now there is a way to activate both offline: Transfer your xRegistry.sys from /dev_flash2/etc/ to your PC (for instance via FTP). Get xRegistry.sys Editor 0.75 at http://stoker25.com Load your xRegistry.sys and edit the following values: /setting/music/atracActivation Checksum: 8DC5 Value: 00000001 Flags: 0000 /setting/music/wmaActivation Checksum: 814B Value: 00000001 Flags: 0000 Save the file, and transfer it back to your PS3, overwriting the original files in /_dev_flash2/etc/ and /_dev_flash2/etc/backup/ That's it, you can now play ATRAC (which afaik is needed for PSP remote play) and WMA. Thanks to stoker25 for his reg editor! --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 114.32.118.136