http://ppt.cc/3J(n All information should be free. So here another part of the Custom Firmware research. 好康到相报！！自制韧体另一章～ My previous post already explained some changes they enable. One nice one I didn't mention yet is, that it activates the Debug Options. 我在之前的文章里面有提过自制韧体可以开放的功能，其中一个没讲到的是如何 开启 debug模式。 The options are enabled now, just the icon is missing. But there is a different way you can handle them. As we already knew, the xregistry.sys (dev_flash2/etc) stores all actual settings. 这个选项已经可以启动了，只是暂时还没有选项图示而已。不过没差，我们还有 修改登录档这条路可以走(dev_flash2/etc)，所有的设定都在里面。 With the changes mentioned in last post, if you tried those; you may have noticed a debug message in the upper right corner. This actually proves the debug options are unlocked to use. 如果有按照前篇文章的方法尝试的话，应该会发现画面右上角出现 debug讯息字 样，代表已经成功进入 debug模式了。 Just extract the xregistry.sys now and find the debug options. Activate them with a 1 instead a 0. I didn't test all so far, but seems most is fine. 将 xregistry.sys档案解开，然後找到关於 debug模式的选项，将机码从 0改成 1就可以进入 debug模式。虽然我还没玩太深入，但截至目前为止运行大抵正常 。 -- ○ ____ _ _ _ _ ____ _ _ ____ _____ ____ 。 ★(_ _)( \( )( \/ )( ___)( \( )(_ _)( _ )( _ \ ｏ _)(_ ) ( \ / )__) ) ( )( )(_)( ) / ● ‧ (____)(_)\_) \/ (____)(_)\_) (__) (_____)(_)\_) ★ ｏ --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 140.120.31.137