感谢 abc2090614 的提醒 我刚刚去查了一下 Y! 关於 autopick 和 pre-rank 的内容 节录至 Y! ( http://ppt.cc/q43w ) After all of your starting positions are filled, the system determines a list of bench positions based on the number of starters at a position vs. the overall roster size. The system then selects the highest-rated available player (based first on your pre-rankings and then our default rankings) that can play one of the bench positions. Given this system, it's important to remember that all starting positions are filled before any bench players are chosen. Additionally, keep in mind that the system determines a maximum number of players to draft per position (starters plus bench) so that no roster ends up with an inordinate number of players at any single position (e.g., five point guards in a league that has a single starting point guard). 恩 autopick 真的会先把"先发位置"填满 其他位置再依 pre-rank 选 而 pre-rank 条文里 ( http://ppt.cc/e0Iu ) When you do rank, it's important to remember that you do not want to rank players position by position. If you were to do this (e.g., all point guards, then all centers, etc.), the autopick system first fills your starting positions and then attempts to draft all of your ranked point guards before considering any of the centers (even if an outstanding center is available). 基本上 也说明了 先发位置填补 是最优先原则 (看来没办法用 autopick 选全 C的阵容.. 或许是 Y! 怕玩家垄断某个位置的设计吧) 不过 如果先发位置填满 接着就是 pre-rank 主导的选秀 但 由於上篇作者的先发位置已经填满 还会发生这样的事 应该就是 BUG了 以上 在此更正 再次感谢 abc2090614 指正 --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 61.216.6.243