这台电脑目前使用一年半左右 配备如下 Q9550 E0 1.2v oc 475x8.5 CORSAIR 2G 1066 X 4 MSI 260GTX Lightning GIGABYTE EP45-UD3P GIGABYTE ODIN GT550 最近发生使用475x8.5时会有当机问题，但若降成450x8.5则不会 因为本身环境闷热，外面温度33，房内温度26，机壳内温度33 北桥虽然只用预设1.2v但温度大约都在48度左右 1.3v以内我都可以接受，主要是搞不懂CPU Termination与CPU PLL的作用 所以想跟超频前辈请问，若我想维持475x8.5的超频数值 那我的MCH CORE、CPU Termination、CPU PLL这三项，会建议设多少数值呢？谢谢 超频设置如下，若有需要其他数值我还可以再提供，感谢 My settings: Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 8 ] Fine CPU Clock Ratio............................[ + 0.5 ] CPU Frequency 4.0GHz............................[ 475 x 8.5 ] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 475 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2 [Disabled] ******DRAM Performance Control****** Performance Enhance.............................[ Turbo ] (G) MCH Frequency Latch.........................[ 400MHz ] System Memory Multipler.........................[ 2.00D ] Memory Frequency 1066...........................[ 950 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 5 ] tRP.............................................[ 5 ] tRAS............................................[ 15 ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Enabled ] CPU Vcore [ 1.20000 ]...........................[ 1.22500v ] 1.200v idle/load CPU Termination [ 1.20 ]........................[ 1.200v ] CPU PLL [ 1.50 ]................................[ 1.570v ] MCH Core [ 1.100 ]..............................[ 1.200v ] DRAM Voltage [ 1.800 ]..........................[ 2.1000v ] --

※ 发信站: 批踢踢实业坊(ptt.cc) ◆ From: 111.240.22.148